SWPH 250/60 Podgrzewacz hybrydowy ze zintegrowanym buforem do pomp ciepła SWPH

		SWPH 250
Capacity water heater		250 / 60
High/Mounting height	mm	H – 1720 / HM – 1910 / D – 650
Insulation		50mm hard PU
Oper. pressure / max. temperature	bar/C°	10/95
Operating pressure/Max. buffer temperature	bar/C°	3/95
Test pressure of tank	bar	15
Weight	kg	215
Cold water inlet boiler	mm	A – Rp1″ 530
Buffer outlet	mm	B – Rp1″ 95
Hot water outlet	mm	C – Rp1″ 1500
Buffer outlet 2	mm	E – Rp1″ 250
Recirculation	mm	F – Rp3/4″ 1338
Operating pressure /Max. coil temperature	bar/C°	16/110
Test pressure coils	bar	25
Coil capacity	l	28
Coils Heat exchange surface	m²	4,27
Inlet coil/ Outlet coil	mm	Is – Rp1″ 1495 / Io – Rp1″ 530
Prolonged power acc. to DIN 4708;	kW(m³/h)	72(1.77)/94(2.31)
80°C/60°C/45°C (coil)	kW(m³/h)	72(1.77)/94(2.31)
NL-power coefficient at 60°C	NL 60C°	18/29
Pressure drop Δp(coil)	mbar	90/120
Inspection opening / flange	mm	Fl – 180 / 110
hermometer	mm	G – Rp1/2″ 1470
Аnode protection	mm	An – Rp1 1/4″ 1645
Additional sensor sleeves	mm	I – Rp1/2″ 996 / I2 – Rp1/2″ 625
Deaeration buffer tank	mm	К – Rp1/2″ 311
Sensor buffer tank	mm	L – Rp1/2″ 238
Еlectric heater buffer tank	mm	N – Rp1 1/2″ 85

Zapytaj o SWPH 250/60 Podgrzewacz hybrydowy ze zintegrowanym buforem do pomp ciepła SWPH